Carpets and upholstery are staples of almost every home. These are available in thousands of types and quality. They make any living space luxurious and stylish for hundreds of years now.
However, carpets and upholstery can get dirty very quickly. This is especially true if you are living with children or pets. The fibers can easily trap dirt, dust, and other debris with daily use. A dirty carpet or furniture upholstery is not only unsightly but unsafe as well. They can trap allergens that can harm anyone who is in contact with such surfaces.
Cleaning out the dirt on these surfaces is difficult, especially without the right tools. While washing is a very common method, it can be very expensive to hire professional cleaners.
Luckily, drill brushes are readily available cleaning attachments to your usual power drill. However, effectively cleaning carpets and upholstery is not just a matter of using a drill brush.
Here are three quick steps to remember when cleaning your carpet and upholstery using drill brushes.
Step 1: Analyze the Stain and the Type of Drill Brush to Use
First, vacuum up any debris. Analyze the stain or dirt on the fabric to determine the correct type of drill brush to use. This will depend on the type of surface, location, and severity of stain on the carpet or upholstery.
Additionally, drill brushes come in different shapes and sizes. They are usually available in sets such as Bring It On Cleaner’s Semi Pro Cleaning Kit. Using the right brush will not only agitate the deep-seated dirt but protect the fibers of the fabric as well.
Test the drill brush on a small section of the carpet or upholstery to see if the material can withstand the brush. This will ensure that you are not damaging it further.
Step 2: Working the Drill Brush
More often than not, you will need the help of an all-purpose cleaner to loosen up the stain from the tiny crevices of the carpet or upholstery. Take advantage of cleaners with included deodorizers such as Oranges 95 All-Purpose Cleaner. Apply the product evenly and allow a few moments to set.
Then, attach the brush to your power drill. Make sure that it is securely fit. Put the brush over the surface with the stain using slight and steady pressure. Turn the power drill on while making sure that you are not putting too much pressure on the surface.
Remember that you are only using the drill brush to agitate and loosen the dirt from the fibers.
Step 3: Cleaning Your Carpet and Upholstery Thoroughly
After working the surface of the carpet or upholstery, use the vacuum to remove the loosened dirt or grime completely thoroughly. Then, use a microfiber towel to remove any leftover residue from the fiber.
Pro tip: use a light-colored microfiber towel to see the grime and dirt that you are removing. When the towel is clear of any dirt and stains, then you are sure that your carpet or upholstery is completely cleaned.
Leave a comment